goede kwaliteit plasmasnijden mondstuk en elektrode, cnc plasmasnijmachine prijs

plasma snijmachine prijs

Product applicatie


The Micro EDGE Pro CNC cutting system is designed to be reliable, cost-effective, and meet your high performance cutting requirements. The Micro EDGE Pro CNC series are built to ensure a smooth and accurate performance. It is equipped with a Hypertherm cnc control system, precision linear guide ways and self aligning plasma torch collision device, automatic height control and automatic ignition system.

The ACCURL base, consists of welded profiles over the entire length which result in an extremely rugged machine frame. The gantry of the machine rests on oversized linear guides, mounted on the welded profiles, and is driven by two brushless AC Servo motors with rack-and-pinion system (double X-axis drive).

Perfect parallel movement:


The correct positioning is assured by high-resolution encoders, directly mounted on the motors. The synchronised system of the two motors assures perfect parallel movement of the gantry over the linear guides. Cutting Table: dry sectionized downdraft or water table is separately from the rails.

Automatic height positioning:


The ACCURL's gantry can accommodate multiple stations such as plasma and/or oxy torches. Included is a MicroEDGE Pro CNC Control unit, monitoring the Z-axis (by brushless AC Servo motor) for the automatic height positioning of the torch during the cutting process.

During the cutting process, the MicroEDGE Pro CNC unit measures the Arc Voltage and adjusts the Z-axis height to maintain a constant distance from the sheet for optimum cutting results.

Correct cutting height:


Each oxy-fuel torch carrier has an automatic flame ignition for the torch, as well as an integrated capacitive sensor "Hypertherm OHC" that controls the Z-axis movement (by brushless AC Servo motor ) for correct setting of the cutting height.

snelle details


conditie: nieuw
Plaats van herkomst: Anhui, China (vasteland)
Merknaam: ACCURL
Model Number: GSII-L1530-PMAX-85A, GSII-L1530-PMAX-85A
Voltage: 380V 220V Optional
Nominaal vermogen: 7.5kw
Dimension(L*W*H): 3880*2150*2000mm
Weight: 2350Kgs
Certification: CE ISO SGS FDA
Warranty: 3 years warranty
Service na verkoop: Ingenieurs beschikbaar voor het onderhoud van machines in het buitenland
Plasma Power: Hypertherm Powermax85 USA
Gantry type: Table
Effective Cutting area(Length): 1500mm
Effective Cutting area(width): 3000mm
Cutting positioning accuracy: ±0.5mm/m
run speed: 4000mm/min
Surface roughness: Ra≤25μm
CNC controller: AI, DST, DWG, DXF, DXP, LAS
Servo motor: Software Supports HPRXD and True Hole

SPECIFICATIONS FOR CNC PLASMA CUTTING MACHINE
Nee.
Naam
Waarde
Eenheid
1
Tafel breedte
1500
mm
2
Length Table
3000
mm
3
Under Torch Height
150
mm
4
Width Machine
2350
mm
5
Length Machine
4450
mm
6
Height Machine
1750
mm
7
Height Table
850
mm
8
X-as
1500
mm
9
Y-as
3000
mm
10
Gewicht
3550
kgs
11
Max (X-Y)Positioning-speed
30
m / min
12
Total Power consumption(without Plasma system )
4
kw

Hoofdfuncties


The machine is equipped with the Hypertherm Micro Edge Pro touch screen CNC with easy to use functions such as: Cutpro wizard, cutting optimization tips, built in process databank allowing the operator to select the material type and thickness.

→Portable monoblock construction with small footprint.
→Easy installation,
→Dual side AC servo Y motorization with direct planetary gear box, helical rack and pinion drive system
→Precision Linear Rail Guide Ways in X and Y axis
→High speed torch lifter with automatic arc voltage height control
→Fully enclosed hose and cable carriers
→Hypertherm Micro Edge Pro CNC
→Integrated downdraft table with CNC electro pneumatic multi zone selection
→Integrated dross bins
→Magnetic Torch anti collision protection system
→Laser pointer for plate alignment

Machine onderdelen


Naam: Machinelichaam
Brand:ACCURL
Origineel: CHINA
a.the steady gantry framework provides an open worktable
b.Synchronous X/Y/Z axes: The Z-axis can run 150mm, suitable for cutting many varieties of metal sheets.
c.High quality guarantees its durability and easier maintenance.

Drive System
Name: Servo Drive & Motor
Merk: YASKAWA
Original: JAPAN
The imported servo motor (Y-axis driven by two servo motors) along with the sophisticated planetary reducer ensures steady, precise and reliable drive.

Name: Rack and linear guide
Brand: YCC
Original: TAIWAN
Advanced cutting system, laser power and servo movement suit each other perfectly, imported high precision gear and rack drive system, exchangeable double work table, to ensure higher processing speed and accuracy.

Name: USA Hypertherm TM125
Brand: Hypertherm
Original: America
PMX125 US Treasure plasma power; maximum perforation thickness: 25mm; Cutting edge thickness: 38mm; section verticality: ≤5 degrees; section Roughness: Ra≤12.5μm; cutting speed 3000mm / min (based on the specific cutting speed cutting steel The thickness is determined, see instructions)

Tags: ,